Description
Tab panes
Bulk pack of 10 ISO to Male DIN antenna adapter cables (With 12v power feed)
This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers.
It also provides a power feed to give 12v from the car radio to the cars amplified antenna.
For Alpine Radios use item 21-101 to convert the DIN end to ISO or use item 21-080
What is the loose Blue wire for? Connect the crimp connector (on the blue wire) to the blue antenna turn on wire, or the blue/white remote turn on wire coming from the new aftermarket radio harness. If neither of these are available then you will need to cut off the crimp connector and splice the wire into the Blue or Blue/white on the radio harness. Use a T Tap style connector or solder the wires together. Trouble shooting I have poor FM reception Check that the adapter is securely connected to the original ISO connection in the car, they can come apart if they get caught when installing the new radio into the dashboard. I have no sound Some cars also need the remote turn on wire for waking up an original amplifier. If there is no sound then make sure that the remote on is connected through to the car as well as to the bullet connection. PLEASE NOTE: If you have needed to make your own connection for the remote turn on wire then make sure that the connection is secure and that 12v is output when the radio is on.
Reviews
There are no reviews yet.