Description
Tab panes
Step up to uncompromising clarity with the BLAM Multix MB 165.3, a premium 3-way 6.5″ (165 mm) car speaker kit designed for advanced car audio systems. This three-way car audio system combines performance and precision for an exceptional sound experience. It features MB6D woofers for powerful bass, MB3 midrange for natural vocal reproduction, and T28MG tweeters delivering dynamic highs thanks to advanced materials such as carbon and magnesium. Adjustable crossovers guarantee optimum frequency separation. Each component is matched to +/- 1 dB for harmonious sound quality. Exclusively distributed in the UK by InCarTec, trusted by professional installers across the globe.
This three-way system includes:
-
2 x MB 6D Woofers: High-performance 165 mm drivers delivering deep, controlled midbass with a rigid carbon fiber cone and oversized neodymium magnet.
-
2 x MB 3 Midrange: 80 mm compact wideband midrange driver offering clarity and precision in the vocal range.
-
Magnesium dome tweeters engineered for ultra-detailed treble with smooth roll-off up to 30 kHz.
-
2 x BTF01 Filters: Tweeter filters for high-frequency tuning and protection
- 2 x WM Filters: Passive crossovers for mid-to-woofer integration with adjustable high-pass and fixed low-pass filtering
Composition
x2 Woofer MB6D
- Size: 165 mm (6.5″)
- Max Power: 200 W
- Nominal Power: 100 W
- Frequency Response: 60 Hz – 5 kHz
- Impedance: 3 Ω
- Carbon fiber cone
- 10-bar neodymium magnet
- 38 mm voice coil
- Machined aluminum phase plug
- Cast aluminum basket
- Matched ±1 dB
x2 Midrange MB 3
- Size: 80 mm (3″)
- Max Power: 100 W
- Nominal Power: 50 W
- Frequency Response: 300 Hz – 10 kHz
- Impedance: 4 Ω
- Fiberglass cone
- Compact basket for easy installation
- Neodymium motor
- Matched ±1 dB
- Size: 28 mm
- Max Power: 100 W
- Nominal Power: 10 W
- Frequency Response: 2 kHz – 30 kHz
- Impedance: 4 Ω
- Magnesium inverted dome
- Machined aluminum body
- Transparent protective grille
- Matched ±1 dB
2 x BTF01 Filters and 2 x WM Filters
- WM – Audiophile component
- High-pass crossover 6/12 dB per octave
- Frequency-adjustable high-pass from 200 to 600 Hz
- Lowpass crossover 12dB/octave
- High-quality design for precise sequence separation
Technical Specifications Sheets (MB 6D)
Technical Specifications Sheets (MB3)
Technical Specifications Sheets (T28 MG)
You might also require (Sold Separately)
- Trim Panel Tool Set – A must have for any installer who has to remove plastic trims, to avoid damage to the delicate finishes on both interior and exterior dashboards and panels. These trim tools are made from a nylon with a non-damaging finish to avoid cosmetic blemishes to the interior or exterior of your vehicle from removing panels and trim.
- Speaker Grilles – If your car speakers are exposed then use speaker our 165mm Grilles for a more discrete appearance and offer a form of protection to kicks and knocks.
- Sound Deadening – Sound deadening can vastly enhance your vehicles sound upgrade by reducing sound vibration, eliminating outside road noise and creating a more acoustic environment, magnifying the sound quality of your system.
- Sound Deadening Tool – Professional sound deadening roller tool designed to allow even pressure when applying sound deadening on the surface of the car, minimising air bubbles and helping to achieve the best possible adhesion.
- Speaker Baffles – Designed to fit any 165mm speaker, these adjustable speaker baffles creates a flexible seal around the back of the speakers, protecting them from water that gets inside doors and interior panels. Additionally it provides a barrier stopping interference between sound from the front and rear of the speakers from having a negative effect on sound quality.
Brand: Blam
Car models: The years stated refer to the model’s years of manufacture, please check the item description for information about any changes there may be within these productions years.
Any Car – Any Car (No year)
Mitsubishi – ASX 1st Gen Facelift 2 (GA) (2019 – 2023)
Reviews
There are no reviews yet.